Note 1:
In some cases, the voltage level of CAN_GND of different CAN
device in the same CAN bus system are not equal. At this time, it
could cause some problems to derogate system staibility of this
CAN bus system.
There is one way to relieve this situation; user can connect the
CAN_GND between those CAN devices to achieve equal
voltage level of CAN_GND.
Wiring of CAN_GND is not necessary; user can modify the
configuration of wiring according to actual applications.
Note 2:
Electronic circuits are constantly vulnerable to Electro-Static
Discharge (ESD), which become worse in a continental climate
area. FG(Frame Ground) provides a path for bypassing ESD to
earth ground, allowing enhanced static protection (ESD)
capability and ensures that the module is more reliable.
If user wants to use FG, both the Pin 7 and Pin 14 should be
connected to earth ground. Within the I-7531, Pin 7 and Pin 14
(FG) are not interconneced.
I-7531 CAN Repeater User Manual (ver. 1.5, 2012/11/22) ------8
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
