CL-200 Series User Manual Version 1.2.0 Apr. 2019
- 72 -
6. Monitoring via Mobile Devices
The iAir App can be used to monitor real-time data of PM2.5, CO/CO
2
level
,
NH3, H2S,
HCHO, TVOC, temperature and humidity anywhere and anytime without any
complicated configuration. The CL-200 modules and your mobile devices such as smart
phones or tablets need be addressed on the same network, and then you can get the
real-time data from CL-200 loggers by entering a specific IP address, or by performing
an automatic search for available devices.
If a CL-200 can
’t be searched in the iAir App, please contact with the network
administrator to make sure the module and your mobile devices are addressed on the
same sub-network. It means that they have the same broadcast address.
The iAir app is available to free download in Google Play and App Store. Search
“iAir” in
or sear
ch “iAir”, “ICPDAS” in App Store and tap on install.
The iAir user manual can be obtained from
http://ftp.icpdas.com/pub/cd/iiot/cl-200/document/
