DL-1xxS-WF Series User’s Manual
DL-1xxS-WF Series
User’s Manual (Rev1.0,May/2022) ------------- 20
Function page include Data Logger Config, Digital Output Control & LCD Display
Control.
Data Logger Config
：
Enable Data Log
Start/Stop the Data Logger & save all capture date in memory. It will start from the first
record every time when enable start the Data Logger.
Record Mode
Select Data Logger running in
Schedule
or
Free Run
mode.
Record full action
Select the action roll over
Overwrite
record or
Stop
the record when Data Logger record full.
Schedule Start/Stop Date Time
To set the Start/Stop Date/Time when select Data Logger running in
Schedule
mode.
Sampling Interval
Select the interval time for sampling.(5,10,15,30Sec,1,5,10,15,30Min,1,12,24Hr)
Digital Output Control (DO0/DO1)
：
Trigger Source
Select which item for trigger the DO Photo MOS active,
0: Disable
1: Temperature ℃
2: Temperature ℉
3: Humidity %RH
4: Dew Point ℃
5: Luminance lux. (Only for DL-111S-WF)
Output Mode
Select DO output mode
0: Latch
or
1: Momentary(1sec)
.
Active Range
Lower Limit/Upper Limit
Set the value active between Lower & Upper limit.
LCD Display Controller (Only for DL-101S-WF)
：
There are 6 items, Date, Time, Temperature (°C and °F), Relative Humidity (RH),
Dew Point for LCD display, it can select On or Off to show on each item using utility,
APP, or Web.
Slide Interval
Select a value of second for LCD switch between each item.
