DL-1xxS-WF Series User’s Manual
DL-1xxS-WF Series
User’s Manual (Rev1.0,May/2022) ------------- 5
1.1
Features
Wi-Fi communication monitoring and configuration
Compatible with IEEE 802.11b/g/n standards
Support Access Point(AP, 1 Client) & Station(STA) modes for wireless networks
Support WEP, WPA and WPA2 wireless encryption
Support Modbus TCP
Support DHCP Server(AP), DHCP Client or Static IP(STA) network configuration
Wide power supply range
Photo MOS Relay output
LCD Display Shows Temperature, Relative Humidity,
Dew Point, Date and Time (DL-101S-WF Only)
Illuminance measure (DL-111S-WF Only)
Up to 650,000 data logger records
IP66 Protection Approval
DIN-Rail or Wall Mounted
1.1.1
Features Description
Compatible with IEEE 802.11b/g/n standards
DL-1xxS-WF complied with IEEE 802.11b/g/n standard from 2.4~2.5 GHz, and it
can be used to connect your wireless LAN.
Support Access Point(AP) & Station(STA) modes for wireless networks
AP mode lets you create a Limited AP(1 Client access allow) network with the
specified SSID to communicate directly with each other without the need for a wireless
access point.
STA mode is the more common network configuration where all wireless clients
connect to the wireless network via a WAP (Wireless Access Point).
Support WEP, WPA and WPA2 wireless encryption
WEP and WPA are common types of security that are used to protect wireless
networks. When WEP or WPA is turned on, DL-1xxS-WF uses a special security key
combination to allow only devices that know this key to connect to its wireless network.
This applies to laptops, smart device, or any other wireless device.
