Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved.
P3
3
Communication Test
As the ZigBee network is controlled by the ZigBee coordinator, the
ZT-2550/ZT-2570 (ZigBee coordinator) must be configured first. Please
refer to documents shown below for full details of how to configure these
devices.
Once configuration of the ZigBee coordinator has been completed.
Set the ”Pan ID” and the “RF Channel” values for the DL-100TMS-ZT
to the same values as the network, and then reboot the device. The
module will automatically start to function on the ZigBee network
using the default protocol.
※
Documents
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-255x/
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/document/zt-257x/
※
Configuration Utility
(Used to configure ZT-2000 I/O device Coordinator)
http://ftp.icpdas.com.tw/pub/cd/usbcd/napdos/zigbee/zt_series/utility/
