P2
1 Connect to PC, Internet, IED and Power
Step1. Connect PC and DNP3 slave (IED) to LAN1 of DNP-211
with Ethernet switch.
Step2. P10 ~ +48 V
DC
power to DNP-211.
2 Execute DNP-211 Utility to set DNP-211
Step1. Input IP address and port
to configure Modbus TCP
of DNP-211.
Step2. Configure Com port baud
rate and data format of
DNP-211 (these setting
only for DNP3 485, if
useless, please don’t
care these Com port
setting).
Step3. Set DNP3 master ID and
Modbus slave ID of
DNP-211, and then select
DNP3 slave amount that
want to connect.
