ECAN-240-FD (Modbus TCP to 2-port CAN FD Gateway) User Manual
Version 1.0.0
Page
：
34
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved E-mail: service@icpdas.com
4.4.2. General Settings
The General Settings provides functions allowing items such as the Alias Name, System
Timeout value and Web Auto-logout value to be configured.
The following is an overview of the parameters contained in the General Settings section:
Item
Description
Default
Network
HTTP Port
The HTTP port number of the Web server function.
80
System Idle
(Network
Watchdog)
This parameter is used to configure the system timeout value. If
there is no activity on the network for a specific period of time,
the system will be rebooted based on the configured system
timeout value.
Timeout value range: 30 to 65535 (seconds); Disable = 0.
300
Web Auto-logout
This parameter is used to configure the automatic logout value.
If there is no activity on the web server for a certain period of
time, the current user account will be automatically logged out.
Range: 1 to 65535 (minutes); Disable = 0.
10
UDP
Configuration
This parameter is used to enable or disable UDP configuration
function.
Enable
Misc.
Alias Name
This parameter is used to assign an alias for each
ECAN-240-FD device to assist with easy identification.
Modbus/C
AN FD
Update Settings
Click this button to save the revised settings to the ECAN-240-FD device.
All settings will take effect after rebooting the device.
