Firmware Update via Ethernet (Ver. 1.0/Sep. 2015)
Page:
2
2.
Firmware Update Procedure
Two methods can be used to update the firmware:
“Local Firmware Update” (traditional)
and
“Remote Firmware Update” (TeamViewer)
. The Local Firmware Update option requires the user to
manually adjust the position of the Init/Run Switch and reboot the module in order to initialize the of
firmware update. Refer to
Section 2.1 “Local Firmware Update”
Firmware Update option allows the user to initialize the module via a web interface without needing
to adjust the hardware switch. Initialization via the web interface is useful when the module is
installed at a remote site and can be accessed via the TeamViewer application installed on a remote
Section 2.2 “Remote Firmware Update”
2.1
Local Firmware Update
Step 1: In the eSearch Utility, click the
“Search Servers”
button to search for any ET-2200
modules connected to the network . (The network settings of the ET-2200 module are described
in Step 3 of Section 1 above)
Step 2:
Right click
the name of the ET-2200 module to be updated.
Step 3: Select the
“Firmware Update”
item from the popup menu and the “Open” dialog box
will be displayed.
2
1
3