Firmware Update via Ethernet (Ver. 1.0/Sep. 2015)
Page:
3
Step 4: In the “Open” dialog box, select the
firmware file
(ET2200H.dat)
that will be
used to update the module, and then click
the
“Open”
button.
Step 5: Assign a
valid IP Address
and the
factory-default MAC Address
for the ET-2200
module. If this IP address is invalid (e.g. IP Address: 0.0.0.0) or a user-defined
MAC address is
note 2 (Page 13) and note 3 (Page 14)
Step 6: Click the
“OK”
button.
Step 7: The module is now ready for the firmware update. A Command Prompt window
will be displayed to indicate the progress of the update.
Waiting for a request from the ET-2200
module to begin updating the device
4
5
6
Valid IP Address
Factory-default
MAC Address