Technical support
：
service@icpdas.com
P4
4
Network Connection
If the GW-2139M and PC in different network domain, please
change the PC's IP address, or use the following software to
modify the GW-2139M IP address.
- eSearch Utility
http://ftp.icpdas.com/pub/cd/tinymodules/napdos/software/esearch/
5
Configuration Tool
ICP DAS provides a configuration Tool to set device.(GW-2139M Utility).
GW-2139M Utility provide mapping table
function. It let device’s BACnet
object properties mapping configured via Modbus register.
The factory default IP address of the device is 192.168.255.1.
About the more detail information for the GW-2139M module, please
refer to the user’s manual.
GW-2139M Factory Defaults & Initial Mode
Network
communication
IP
192.168.255.1
Please follow your case
to modify the network
settings.
Mask
255.255.0.0
Gateway
192.168.0.1
