background image

 

GW-5492/GW-5493  User’s Manual  

V1.01  2011/09/01 

 

 

 

3.  Web Based Configuration Tool 

This chapter is to describe the web structure, software operating interfaces, and configuration of 

BACnet and Modbus mapping. 

GW-5492/GW-5493 provides Web-based configuration for the BACnet and Modbus settings. The 

functions include: 

 

System information and configuration 

 

Network and COMPort settings 

 

Management and settings of Device’s Points (Address) for Modbus RTU Master and TCP 

Client 

 

BACnet configuration and management 

 

BACnet Instance and Modbus Device point Mapping management 

3.1  Overview 

This document is to describe the web structure, software operating interfaces, and configuration of 

BACnet and Modbus mapping. 

GW-5492/GW-5493 provides Web-based configuration for the BACnet and Modbus settings. The 

functions include: 

 

System information and configuration 

 

Network and COM Port settings 

 

Management and settings  of Device’s Points (Address) for Modbus RTU Master  and TCP 

Client 

 

BACnet configuration and management 

 

BACnet Instance and Modbus Device point Mapping management 

3.2  Device Selection 

 

GW-5492: BACnet/IP (Server) to Modbus RTU (Client) Gateway 

 

GW-5493: BACnet/IP (Server) to Modbus TCP (Client) Gateway 

3.3  Using Web-based Configuration Tool 

Connect the GW-549x to network, and use standard web browser (Internet Explorer, Mozilla Firefox) 

to launch the user interface.    The default link and network settings are as followed: 

 

Web Address:

 

http://192.168.255.1

 

Summary of Contents for GW-5492

























Reviews: