I-2533T-FD ( CAN/CAN FD to Multi-mode Fiber Bridge ) User Manual (version 1.0.0)
Page: 35
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
[Standard ID/Extended ID]
block:
“
CAN ID (HEX)
” block:
Press the “Add” button to add a range of standard/extended CAN ID into
“Standard/Extended ID Fiter” frame.
<1>
“
Get CAN Standard IDs/Get CAN Extended IDs
” button:
Get all the CAN Standard/Extended IDs setting from the module.
<2>
“
Set CAN Standard IDs/Set CAN Extended IDs
” button:
Set the CAN Standard/Extended IDs setting on “Standard/Extended ID Fiter”
frame into the module.
<3>
“
Re-Init CAN
” button:
All settings in the “CAN Filter Setting” will take effect after pressing “Re-Init CAN”
button.
<4>
“
Save File
” button:
Save the CAN Standard/Extended IDs setting on “Standard/Extended ID Fiter”
frame into an ini file.
<5>
“
Load File
” button:
Load the CAN Standard/Extended IDs setting from a selected ini file to
“Standard/Extended ID Fiter” frame.
<6>
“
Delete Row
” button:
Delete a selected row CAN ID from “Standard/Extended ID Fiter” frame.
<7>
“
Clear Table
” button:
Delete all CAN IDs from “Standard/Extended ID Fiter” frame.
Standard ID Filter
Extandard ID Filter
