I-7530A-MR Modbus RTU to CAN
Converter User’s Manual (Version 1.07, 06/2016) ------------- 60
4.9 RA[CHK]<CR>
Description:
Reboot the I-7530A-MR module. This command is usually used
while the status of CAN bus is bus-off. In this case, users can use this
command to reboot the module to work it again.
Syntax: RA[CHK]<CR>
RA
Command character
Response:
Valid command will reboot the I-7530A-MR module.
Invalid command: ?<Error Code><CR>
Note:
It is necessary to enable the
“Error Response” function while using
the UART2CAN Utility in order to receive Syntax and/or communication
error information.
Example:
Command: RA<CR>
The I-7530A-MR module will reboot after it had received this command.
