I-7540D-MTCP Ethernet/ Modbus to CAN Converter Quick Start User Guide Version 1.0 ------ 6
I-7540D-MTCP #A
I-7540D-MTCP #B
CAN parameters
Specification: 2.0A
CAN baud rate: 1M bps
ACC: 00 00 00 00
ACM: FF FF FF FF
Err Response: No
Time-stamp Response: No
Specification: 2.0A
CAN baud rate: 1M bps
ACC: 00 00 00 00
ACM: FF FF FF FF
Err Response: No
Time-stamp Response: No
Network status
IP: 192.168.255.1
Mask: 255.255.0.0
Gateway: 192.168.0.1
IP: 192.168.255.2
Mask: 255.255.0.0
Gateway: 192.168.0.1
4. Testing the I-7540D-MTCP by using the I-7540D-MTCP Utility
Step1: Run the I-7540D-MTCP Utility (I-7540D-MTCP.exe) two times. Then
two I-7540D-MTCP Utility windows will be displayed on the screen.
Assume that one is named as Utility #A and the other is called Utility
#B.
Step2:
Click the “Connect” button to open the connection dialog. Key-in the
IP of these I-7540D-MTCP
s and press the “Connect” button to
connect with them.
Step3: After connecting with them, select the
“Modbus Test” tab. Utility #A is
shown in the below figure and Utility #B will be similar to Utility #A.
