LP-2841M OS Update Guide Copyright © 2023 ICP DAS Co., Ltd. All Rights Reserved. Page: 5
3.
【
Update Procedure
】
< Important Notes >
1.
Ensure that you perform a backup of any important files, before attempting to update
the OS image.
2. DO NOT power off or reboot the controller while the OS image is being updated, as this
may result in the OS image becoming corrupted, which may cause the controller to
malfunction.
(1)
To turn on the LP-2841M power.
(2)
To run the command
“iW-RainboW-G34M.sh”
in Linux OS or run the command
“iW-RainboW-G34M.bat”
in Windows OS to install LP-2841M factory OS.
The
recovery process may spend 7 ~ 8 minutes.
Linux PC
Fig.3 Run the command “iW-RainboW-G34M.sh” in Linux OS
Windows PC
Fig.4 Run the command “iW-RainboW-G34M.bat” in Windows OS