Home
/
ICP DAS USA
/
M-7018
/
Quick Start Manual

ICP DAS USA M-7018, Quick Start Manual

The ICP DAS USA M-7018 is a versatile data acquisition module designed for industrial applications. For a hassle-free start, make sure to download the Quick Start Manual from 88.208.23.73:8080, providing detailed instructions and information. This manual is available for free download, ensuring an optimized user experience right from the beginning.

Share

1
2
3
4
5
6
7

Page: 3 / 7

background image

M-7018 8 Channel Analog Input Module- QuickStart (Dec/2017)

ICP DAS USA, Inc.

www.icpdas-usa.com

| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

3

5. Configuration

To install the module, follow the steps below:
1. Connect the thermistor analog input.
2. Connect the module to the RS-485 network using the DATA+ and DATA- terminals. If
the host is only equipped with an RS-232 interface, then an RS-232 to RS-485
converter will be required.

3. Connect the module to the power supply using the +Vs and GND terminals. Note that
the voltage supplied should be in the range of +10 to +30V DC.

«
1
2
3
4
5
...
»

Summary of Contents for M-7018








Reviews:

No comments

Related manuals for M-7018

Brand: Samsung Pages: 2

Brand: Samsung Pages: 33

Brand: WALTCO Pages: 20

Brand: Teac Pages: 2

Brand: TagMaster Pages: 28

Brand: Bticino Pages: 84

AQUASNAP 30RA "B"

Brand: Carrier Pages: 36

Brand: Ascon tecnologic Pages: 4

GreenKeeper 212

Brand: Toro Pages: 39

Brand: Parkside Pages: 124

Brand: RadonAway Pages: 22

Brand: YeriSystems Pages: 7

Brand: RTS Pages: 131

Brand: Robin Pages: 75

Genie BBSKETDL15B-1001

Brand: Terex Pages: 69

Brand: Avidsen Pages: 180

HS 2000 LARGE FH

Brand: R. Beck Maschinenbau Pages: 34

Brand: SEW-Eurodrive Pages: 384

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands