M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
109
2.50 ~AARD
Description:
This command is used to read the response delay time for a specified module.
Syntax:
~AARD[CHKSUM](CR)
~
Delimiter character
AA
The address of the module to be read in hexadecimal format (00 to
FF)
RD
The command to read the response delay time
Response:
Valid Command:
!AATT[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
TT
A two-digit hexadecimal value representing the response delay time
value in milliseconds. For example, 01 denotes 1 millisecond and 1A
denotes 26 milliseconds. The value must be less than or equal to 1E.
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: ~01RD10
Response: !01
Sets the response delay time for module 01 to 10 (16 milliseconds) and
returns a response indicating that the command was successful.
Command: ~01RD
Response: !0110
Reads the response delay time for module 01 and returns a response
indicating that the command was successful, with a value of 10 indicating
16 milliseconds, meaning that all responses will be sent after 16
milliseconds have elapsed.
Related Commands:
Section 2.51 ~AARDTT
Summary of Contents for M-7026
