M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
152
2.74 @AARLi
Description:
This command is used to read the low latch value for a specific Analog Input
channel of a specified module.
Syntax:
@AARLi[CHKSUM](CR)
@
Delimiter character
AA
The address of the module to be read in hexadecimal format (00 to
FF)
RL
The command to read the low latch value for the Analog Input
channel
i
The Analog Input channel to be read, zero based (0-5)
Response:
Valid Command:
!AA(Data)[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
(Data)
The low latch value for the specified Analog Input channel. The data
format will be the same as that set by the %AANNTTCCFF command
(Section 2.1). See Section 1.9.4 for details of the data format.
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: @01RL0
Response: !01-02.000
Reads the low latch value for Analog input channel 0 of module 01 and
returns a response indicating that the command was successful, with a
value of -02.000 (-2.0 V) in Engineering Units format.
Command: @01CL0
Response: !01
Clears the low latch value for Analog Input channel 0 of module 01 and
returns a response indicating that the command was successful.
Command: @01RL0
Response: !01+00.000
Reads the low latch value for Analog Input channel 0 of module 01 and
returns a response indicating that the command was successful, with a
value of +00.000 (0.0 V) in Engineering Units format.
Command: @01RLF
Response: ?01
Attempts to read the low latch value for Analog Input channel 15 of
module 01, but returns an response indicating that the command was
successful because Analog Input channel 15 does not exist.
Summary of Contents for M-7026
