M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
33
2.3 #AA
Description:
This command is used to read data from all Analog Input channels of a
specified module.
Syntax:
#AA[CHKSUM](CR)
#
Delimiter character
AA
The address of the module to be read in hexadecimal format (00 to
FF)
Response:
Valid Command:
>(Data)[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
>
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
(Data)
The data from all Analog Input channels. See Section 1.9.4 for details
of the data format.
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: #01
Response:
>+025.12+020.45+012.78+018.97+000.00+000.
00
Reads data from the Analog Input channels of module 01 and returns a
response indicating that the command was successful, with the data from
all Analog Input channels in Engineering Units format.
Command: #02
Response: >4C532628E2D683A200000000
Reads data from the Analog Input channels of module 02 and returns a
response indicating that the command was successful, with the data from
all Analog Input channels in hexadecimal format.
Command: #03
Response:
>-9999.9-9999.9-9999.9-9999.9-9999.9-9999.9
Reads data from the Analog Input channels of module 03, but returns a
response indicating that although the command was successful, the data
is not within the valid range.
Related Commands:
Section 2.1 %AANNTTCCFF, Section 2.4 #AAN, Section 2.10 $AA2, Section
2.18 $AA7CiRrr
Summary of Contents for M-7026
