M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
53
2.14 $AA5
Description:
This command is used to read the reset status of a specified module.
Syntax:
$AA5[CHKSUM](CR)
$
Delimiter character
AA
The address of the module to be read in hexadecimal format (00 to
FF)
5
The command to read the reset status
Response:
Valid Command:
!AAS[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
S
The reset status of the module:
0: This is
NOT
the first time the command has been sent since the
module was powered on, which denotes that there has been no
module reset since the last $AA5 command was sent.
1: This is the first time the command has been sent since the module
was powered on.
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: $015
Response: !011
Reads the reset status of module 01. The module returns a response
indicating that the command was successful and that it is the first time the
$AA5 command has been sent since the module was powered on.
Command: $015
Response: !010
Reads the reset status of module 01. The module returns a response
indicating that the command was successful and that there has been no
module reset since the last $AA5 command was sent.
Related Commands:
None
Summary of Contents for M-7026
