M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
73
2.26 $AAC
Description:
This command is used to clear the Digital Input and Digital Output latch data
for a specified module.
Syntax:
$AAC[CHKSUM](CR)
$
Delimiter character
AA
The address of the module to be cleared in hexadecimal format (00 to
FF)
C
The command to clear the Digital Input and Digital Output latch data
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: $01L1
Response: !030100
Reads the low latch data for module 01 and returns a response indicating
that
the command was successful, with a value of 030100 showing that
Digital Output channels 0 and 1 and Digital Input channel 0 are latched
low.
Command: $01C
Response: !01
Clears the latch data for all channels of module 01 and returns a
response indicating that the command was successful.
Command: $01L1
Response: !000000
Reads the low latch data for module 01 and returns a response indicating
that the command was successful, with a value of 000000 showing that
all latched Digital Output and Digital Input channels have been cleared.
Related Commands:
Section 2.31 $AALS
Summary of Contents for M-7026
