M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
97
2.43 ~AA5N
Description:
This command is used to store the current Analog Output value as the safe
value for Analog Output channel N of a specified module.
Syntax:
~AA5N[CHKSUM](CR)
~
Delimiter character
AA
The address of the module to be set in hexadecimal format (00 to FF)
5
The command to set the Analog Output safe value
N
The Analog Output channel to be set, zero based (0-1)
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: #010+06.000
Response: >
Sets the Analog Output value for Analog Output channel 0 of module 01
to +06.000 (+6.0 V) and returns a response indicating that the command
was successful
Command: ~0150
Response: !01
Sets the current Analog Output value as the Analog Output safe value for
Analog Output channel 0 of module 01 and returns a response indicating
that the command was successful.
Command: ~0140
Response: !01+06.000
Reads the Analog Output safe value for Analog Output channel 0 of
module 01 and returns a response indicating that the command was
successful, with a value of +06.000 (+6.0 V).
Command: ~015F
Response: ?01
Attempts to set the current Analog Output value as the Analog Output
safe value for Analog Output channel 15 of module 01, but returns a
response indicating that the command was unsuccessful because Analog
Output channel 15 does not exist.
Related Commands:
Section 2.5 #AAN(Data), Section 2.42 ~AA4N
Summary of Contents for M-7026
