PEX-1202 and PCI-1202/1602/180x Series Quick Start Guide
ICP DAS CO., LTD.
3
WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com
Please make sure JP1 jumper and SW1 is kept in default setting before
self-test, as follows:
Jumper
JP1: Analog Input Type Selection
SE
DIFF
1 2
5 6
JP1
SE
DIFF
JP1
1 2
5 6
Single-Ended Inputs (Default)
Differential Inputs
Switch
SW1: Card ID Setting
Step 1:
Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI/PCI Express slot.
Step 4: Carefully insert your I/O card into the PCI/PCI Express slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC
Card ID
1
ID0
2
ID1
3
ID2
4
ID3
(*) 0
ON
ON
ON
ON
1
OFF
ON
ON
ON
2
ON
OFF
ON
ON
:
:
:
:
:
0xD
OFF
ON
OFF
OFF
0xE
ON
OFF
OFF
OFF
0xF
OFF
OFF
OFF
OFF
(*) Default setting
