PCI-82x Series Cards
Multifunction Boards
User Manual, Ver. 1.5, Jan. 2017, PMH-024-15, Page: 11
2.2
Jumper Settings
PCI-822/826 Series cards include a number of jumpers that can be used to configure features such as
the Analog Input/Output Type, the Analog Output Range, and the Digital Input/Output mode, etc.
each of which is described in more detail below.
2.2.1
JP1 (Analog Input Type)
Jumper JP1 is used to configure the Analog Input type as either single-ended or differential. To
configure single-ended input, connect pin1 to pin 3 and pin 2 to pin 4, as illustrated in the diagram
below. The default configuration is single-ended.
Jumper
Single-ended Input
(Default)
Differential Input
JP1
5
6
SE
2
4
1
3
DIFF
5
2
1
3
6
4
SE
DIFF
2.2.2
JP6/JP7 (Analog Output Range)
Jumpers JP6 and JP7 are used to configure the output range for Analog Output channel 0 and 1,
respectively. Connecting pins 1 and 2 sets the output range to -10 V to +10 V or 0 to +10 V, while
connecting pins 2 and 3 sets the output range to -5 V to +5 V or 0 to +5 V. The default configuration
is ± 10 V.
Jumper
± 10 V or 0 to +10 V
(Default)
± 5 V or 0 to +5 V
JP6 (D/A CH0)
JP7 (D/A CH1)
1
10 V
3
2
5 V
1
5 V
3
2
10 V
