SI-002 User Manual, version 1.0 Page: 25
Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
these modes to set the IP address of SI-002 when booting.
Local IP Config:
a. IP Address
：
When Boot Protocol is
“
Static IP
”
, the user can set IP address of
SI-002 in this field.
b. NetMask
：
When Boot Protocol is
“
Static IP
”
, the user can set subnet mask of
SI-002 in this field.
c. GateWay
：
When Boot Protocol is
“
Static IP
”
, the user can set gateway of
SI-002 in this field.
3.2.5. Audio Config
The user can set the output volume and input volume in this page. When changing
the setting in this page, the user must restart the SI-002 to enable new settings.
Output Volume
：
0~10
The maximum output volume is 10.
Input Volume
：
0~10
The maximum input volume is 10.
