Tiny Serial-to-Ethernet Device Server
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
-
64 -
Step 4: Configuring the Pair-connection (Server Mode) on the Web Server for tDS-700 #2
1.
Enter the configuration page for the tDS-700 #2 web server.
2.
Click the
“Port1
” link to enter the settings page of the tDS
-700 #2.
3.
Set the Baud Rate to “
115200”
and the Data For
mat to “
8, None, 1”
.
(Refer to
Figures 5-3 to 5-5
for illustrations of how to perform the above steps.)
4.
Select “
Server
” from the “
Application Mode(Server Mode)
” drop down options and then click
the “
Submit
” button to complete the configuration.
Step 5: Testing the Pair-connection Functions
1. The Test2COM.exe program is located at:
CD:\Napdos\multiport\utility
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/utility/
Figure 5-6
