Tiny Serial-to-Ethernet Device Server
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
-
69 -
2.
Click the
“Port1
” link to enter the settings page.
3.
Select the appropriate
Baud Rate and Data Format
settings from the relevant drop down
options, for example “
115200
” , “
8”, “None”
and
1
” .
4.
The pair-connection settings area as follows:
4-1:
Select “
Client
” from the “
Application Mode(Server Mode)
” drop down options
4-2: Type the
IP address of the TCP Server (PC #2)
in the “
Remote Server IP
” field.
4-3: Assign a
TCP port for the TCP Server (PC #2)
in the “
Remote TCP Port
” field.
5.
Click the “
Submit
” button to complete the configuration.
※
Refer to
Figures 5-13
for an illustration of how to perform the above steps.
Figure 5-12
