Tiny Serial-to-Ethernet Device Server
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
-82 -
Step 4: Configuring the Pair-connection (Server Mode) on the Web
Server for tDS-700#2
1.
Enter the configuration page for the tDS-700 #2 web server.
2.
Click the
“Port1
” link to enter the settings page of the tDS
-700 #2.
3.
Set the Baud Rate to “
115200”
and the Data Format to “
8, None, 1”
.
Refer to Figures 6-3 to 6-5 for illustrations of how to perform the above steps.
4.
Select “
Server
” from the “
Application Mode (Server Mode)
” drop down options and then click
the “
Submit
” button to complete the configuration.
Step 5: Testing the Pair-connection Functions
1.
Lauch the Test Program.
The following example use Test2COM.exe to perform self-test.
The Test2COM.exe program can be obtained from the ICP DAS FTP site or the ICP DAS web site. The
location of the download addresses are shown below:
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/utility/
ftp://ftp.icpdas.com/pub/cd/iocard/pci/napdos/multiport/utility/
Figure 6-6
