Tiny Serial-to-Ethernet Device Server
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
-83 -
2.
Double-click the Test2COM.exe program and type the relevant configuration as follows:
Note
The Baud Rate and data format depend on the serial port settings for the web configuration above.
Figure 6-7
Figure 6-8
1. Double Click Test2COM.exe
2. Type COM1\COM2
3. Check Data Bits: 8
4. Check Parity: None
7. Check Baud Rates: 115200
5. Check Stop Bits: 1
6. Uncheck
8. Loop: 10
9. Click “Start Test”
10. Test Results: “Failed Test:0”
