TPD/VPD Series HMI Device User Manual
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.
Page: 60
2.4.3
Panel Mounting
The VPD Series device can be mounted on a panel of maximum thickness 5
mm. Adequate access space can be available at the rear of the instrument
panel for wiring and servicing purposes.
1. Prepare the panel and cut the hole to the
specified size. The detailed about panel cut-out size
depends on the type of VPD Series, please refer to
2. Attach the VPD Series to the cut-out hole.
Panel thickness up to 5 mm
