TPD/VPD Series HMI Device User Manual
Copyright © 2020 ICP DAS Co., Ltd. All Rights Reserved.
Page: 96
Step 8:
Verify that the
information for PET-7060 module is correct
(e.g., the Device Name, Net ID,
Tag Name, IO Type, Start Address and Default Value, etc.) and then click the
“OK”
button to save the
configuration and close the “Devices” dialog box.
For more detailed information regarding the Self-test process, which is used to confirm that
the PET-7060 and TouchPAD are operating correctly, refer to
If you use a third-party Modbus TCP Slave device, refer to
FAQ: How do I access a third-party
Modbus TCP slave device using a TouchPAD
for more detailed information.