tSH-700 Series Firmware Update via Ethernet (Ver. 1.2/Jun. 2017)
Page: 15
3.2 How to update Firmware when the Different
Network Segment for IP Address of the tSH-700
and Host PC.
For example, the first time to get the tSH-700 module, the factory default IP address is 192.168.255.1,
but the host PC IP address is 10.0.8.31, refer to the following two methods to update firmware.
Method 1:
Using
“Dynamic Host Configuration Protocol (DHCP)”
to automatically assigns an IP
address to tSH-700 module.
Follow the procedure described below:
Step 1: Run the eSearch Utility to search for any tSH-700 modules to the network
Step 2: Double click the name of tSH-700 to open the
“Configure Server (UDP)”
dialog box.
Step 3: Select the
“1: ON”
option from the
“DHCP:”
drop-down menu and click the
“OK”
button.
1
2
3
