WF-2000 Series AIO
User’s Manual (Ver. 1.1, Mar./2014) ------------- 32
shown in Figure 2-5.
4.2 WF-2000 series Configuration
4.2.1
WF-2000 Series Wireless Network Configuration
Figure 4-3
:
Configuration Interface
01
、
Net ID
: The Unit Identifier in Modbus TCP/IP application data
unit. This case is set as "1" in Figure 4-3.
02
、
IP
Address
:
Set the local WF-2000 series' IP. Here set to
"192.168.255.1".
03
、
Subnet Mask
: Net Mask settings. Here set to "255. 255. 255.0".
04
、
Gateway
: Gateway settings. Here set to "192.168.255.254".
05
、
Wi-Fi Mode
: Wireless network connection mode settings. Here
set to "Ad-Hoc" mode. (If the mode is "AP" mode, wireless AP
devices is needed.)
06
、
SSID
: Service set identifier. Here set to "WF-2019".
07
、
Wireless Key: Wireless encryption Key. Here does not have the
setting.
08
、
Wireless CH
: Wi-Fi connection channel settings. Here set to "2".
09
、
Encryption : Encryption mode setting. Here set "NONE" (without
encryption).
10
、
Upload parameters : After completing the settings above, select
the "RS-232" interface, communication "Net ID" and "COM Num".
Press "Write Parameter" button to upload the parameters.
