ICP DAS WISE User Manual
http://wise.icpdas.com
66
iv.
Input the Nickname for the I-7000/DL DCON modules.
v.
Click
to add the I-7000/DL DCON module to the list. After
adding the I-7000/DL DCON module, click “Save” button to save
the changes.
Figure 6-15
：
Add the I-7000/DL Module manually
6.3 I-7000/DL DCON Module List Operation Interface
After the I-7000/DL DCON modules are added to the I/O Module list via
auto scan or manual work, the I-7000/DL DCON modules will be listed as
below:
Figure 6-16
：
I-7000/DL Module List Operation Interface
The following functions allow to perform settings or rearrange order of the
I-7000/DL DCON modules. Please select the I-7000/DL DCON module and
click on the function button to perform the operations:
Setting: Click the radio button in front of the I-7000/DL DCON
module and click on “Setting” to get into the setting page of the
I-7000/DL DCON module. The settings for each I-7000/DL DCON
module will be given in the following section.
Move Up: Click the radio button in front of the I-7000/DL DCON
module and click on “Move Up” to move the I-7000/DL DCON
