ICP DAS WISE User Manual
http://wise.icpdas.com
48
and V3 to work with the SNMP Network Management software for
monitoring the system data and I/O module data. The SNMP Setting page
allows you to enable or modify the settings of the SNMP function on the
WISE. The following figure illustrates the set up interface:
Figure 5-17
：
SNMP Setting Page
Please follow the steps below for the SNMP settings:
i.
In the “Function Status” field, check “Enable” to enable SNMP server.
ii.
In the “Version” field, select the SNMP version that you want to use.
Currently WISE supports SNMP V2c and V3 protocols,
iii.
If the user selects “V2c” in the “Version“ field, he must set up the
string in the “Read Community” and “Write Community” fields. The
default setting of “Read Community” and “Write Community” field is
“public” and “private”.
iv.
If the user selects “V3” in the “Version” field, he must set up the
SNMP user list. The setting interface is as follows.
Figure 5-18
：
SNMP V3 Setting Page
v.
Press the “+Add new user” button to enter the SNMP User Setting page.
The setting interface is as follows:
