ICP DAS WISE User Manual
http://wise.icpdas.com
83
0
4500
、
0
4501
、
0
4502 and
0
4503.
Figure 6-36
：
Coil Output Setting Example for Modbus RTU module
To modify the settings of starting address, quantity or Read/Write
authority, please click on the setting block and input the setting.
Click “OK” for modification or click “Remove” to remove the
setting. The Read/Write authority is for user to enable or disable the
Read/Write capability for the address block of the module.
If the user wants to assign a Nickname for the address blocks, the
user can click on the “Nickname Setting” tab, and then input the
Nickname for each address block. The Nickname will be shown in
the “Channel Status” and “Rule Setting” pages.
After all settings of the Coil Output of the Modbus RTU module are
