- 12 -
Chapter 3 Maintenance
There are some essential parts you need to know during the operation for the purpose
of maintenance or upgrading.
3.1 Power Supply
Power supply is equipped at the rear of PC fastened by 4 screws. So you need to
unfasten the four screws to take it out for maintenance or upgrading. Please refer to
the diagram of section 2.3.
3.2 Cooling Fan
MPC-52P is equipped with 8 cm with removable fan filter and 6 cm cooling fan by
the side of chassis. Please refer to the diagram of section 2.4. You have to open the
chassis and unfasten the four bolt kits to take fan out for maintenance. The filter is
suggested being replaced or cleaned at suitable time, which depends on the working
environment.
3.3 Disk Drives
MPC-52P provides one 5.25" Drive CD-ROM, one 3.5" FDD and one 3.5" HDD.
Please refer to the diagrams of section 2.2 to uninstall 5.25" CD-ROM, 3.5" HDD and
3.5" FDD.
Warning: Whenever you need to take off a part for either maintenance or
upgrading purpose, you should switch off the power supply and unplug the
power cord first.
Warning: Do not use the wet filter to filter out the dirt.
