43
Disable (default)
No power management. Disables all four modes
Min. Power Saving
Minimum power management. Doze Mode = 1 hr.
Standby Mode = 1 hr., Suspend Mode = 1 hr., and
HDD Power Down = 15 min.
Max.
Power
Saving
Maximum power management --
ONLY
AVAILABLE FOR SL CPU’S
. Doze Mode = 1 min.,
Standby Mode = 1 min., Suspend Mode = 1 min.,
and HDD Power Down = 1 min.
User Defined
Allows you to set each mode individually. When not
disabled, each of the ranges are from 1 min. to 1 hr.
except for HDD Power Down which ranges from 1
min. to 15 min. and disable.
PM Control APM
When enabled, an Advanced Power Management device will be activated to
enhance the Max. Power Saving mode and stop the CPU internal clock.
If the Max. Power Saving is not enabled, this will be preset to
No
.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and
write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
44
Video Off After
When enabled, this feature allows the VGA adapter to operate in a power saving
mode.
N/A
Monitor will remain on during power saving modes.
Suspend
Monitor blanked when the systems enters the
Suspend mode.
Standby
Monitor blanked when the system enters Standby
mode.
Doze
Monitor blanked when the system enters any
power saving mode.
MODEM Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if any) on your
system. Activity of the selected IRQ always awakens the system.
The choices: NA, 3, 4, 5, 7, 9, 10, 11
PM Timers
The following four modes are Green PC power saving functions which are only
user configurable when
User Defined
Power Management has been selected.
See above for available selections.
Doze Mode
