32
BIOS SETUP. If you enter the BIOS SETUP with Supervisor
Password, you can access every setup option on the main menu
but with User Password you can only choose three setup options
(USER PASSWORD, SAVE SETTING AND EXIT and EXIT
WITHOUT SAVING). To disable these passwords, enter the
BIOS SETUP menu with Supervisor Password and then just
press the <Enter> key instead of entering a new password when
the 'Enter Password' prompt pop-up.
4.10 Auto-Detect Hard Disks
This option detects the parameters of an IDE hard disk drive
(HDD sector, cylinder, head, etc) automatically and will put the
parameters into the Standard CMOS Setup screen. Up to 4 IDE
drives can be detected and the parameters will be listed in the
box. Press <Y> if you accept these parameters. Press <N> to skip
the next IDE drives.
Note: If your IDE HDD was formatted in previous older system,
incorrect parameters may be detected. In this case, you need to enter
the correct parameters manually or low-level format the disk.
4.11 Auto Configuration with Optimal Settings
This option lets you load the
optimal
default settings. These
settings are
best-case values
, which will provide the best
performance. Whenever your CMOS RAM is damaged, this
optimal settings will be loaded automatically.
Summary of Contents for ROCKY-P218BXA Pentium II & Creative Sound
Page 2: ......
