35
4.6 PNP / PCI CONFIGURATION
This menu is used to assign certain IRQ to your PNP/PCI
devices manually.
z
PNP OS Installed: if you install Plug and Play operating
system (OS), the OS will reassign the interrupt if you
select Yes in this field. If you install a non-Plug and Play
OS or if you want to prevent reassigning of interrupt
settings, select No in this field.
z
Resources Controlled By: select Auto if you want the
computer to assign the IRQs automatically and vice versa.
z
Reset Configuration Data: Enabling this field means you
allow the configuration data to be reset.
z
IRQ-xx assigned to: these fields show whether a PCI/ISA
uses certain IRQ.
Summary of Contents for WAFER-5823
Page 11: ...11 WAFER 5823 Board Jumper Setting...
Page 12: ...12 WAFER 5823 Board Dimensions...
