EtherCAT to Modbus RTU Gateway
Copyright © 2017 ICP DAS CO., Ltd. All Rights Reserved.
-
96 -
A3. Manually Configure and Upload
Step 1
Download the 7188ECAT folder.
The 7188ECAT folder is a configuration and diagnostic utility that can be obtained either from the
companion CD
or ICP DAS web site at:
CD:\Napdos\ECAT-2000\Software\
http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/software/
Step 2
Double-click the“commands.txt”to open configuration file.
Step 3
Set
the Baud Rate and Data Format depend on Modbus RTU device.
Command
Description
115200
Baud Rate Valid Range: 1200 ~ 115200
N
Parity: N, E, O
1
Stop Bit: 1, 2
Figure A3-1
Figure A3-2