Technical support:
service@icpdas.com
P2
1
Connecting the Power and Host PC
1)
Make sure your PC has workable network settings.
Disable or well configure your Windows firewall and Anti-Virus firewall first,
else the
“Search Servers”
on
Chapter 5
may not work. (Please contact
with your system Administrator)
2)
Connect both the ET-2261/2261-16 and your PC to the same sub network or
the same Ethernet switch.
3)
Supply power to the ET-2261/2261-16.
Refer to the below for the valid range:
Model
ET-2261
ET-2261-16
Valid Voltage Range
+10 to +30 V
DC
+10 to +48 V
DC
4)
Verify that the
“PWR”
LED indicator
on the ET-2261/2261-16 is flashing.
Red, OK
