1.
Make sure your PC has workable network settings.
2.
Disable or well configure your Windows firewall and anti-virus
firewall first, else the “Network Scan” on step 4, 5 and 6 may
not work. (Please contact with your system Administrator)
3.
Check Init/Run DIP
switch if it is on
Init
position.
4.
Connect both the GW-7472 and your computer to the same
sub network or the same Ethernet switch, and power the GW-
7472 on.
2
GW-7472 Quick Start
Connecting the Power and Host PC
