11
Using your Induction Hob
To start cooking
1. Touch the ON/OFF key
（
A
）
for 3 secnds.
After power on, the buzzer beeps once, all displays
show “ – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. According to the heating zone where the pan is placed, adjust heat setting by
touching the slider regulating key(E) control.
• If you don’t choose a heat setting within 20 seconds, the induction hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes alternately with the heat
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
