5
Installation
Please follow the steps listed below to install the ICIP-D1300. Please refer the image above for
reference.
Please draw the installation holes in the installation surface and then mark three
expansion bolts holes in the surface. Insert three bolts in the hole and secure firmly.
Please line up the installation holes of the bottom of the pendant mount bracket to the
installation holes in the surface. Then insert the three bolts to the holes of the bottom of
the bracket. Finally fasten the device on the installation surface.
Focusing
: To focus, you will notice a Hex or Philips screw at the top/side of the lens.
Unscrew slightly and carefully turn the lens itself left or right, attempting to find a good
placement. Tighten the screw back once you have the lens placed correctly.
