13
Monitor
The receiver can monitor the video feed from the Outdoor
Station by pressing and holding .
If there is one Outdoor Station, the receiver will display 1#
Monitor. If there are more than 1 Outdoor Stations, the
Monitor can be selected by pressing
Up
or
Down
to choose the Monitor and select by beneath
Select
.
14
PIR Motion Sensor
1.Switch the selector switch on the back of the Outdoor Station to
the
ON
position.
2.When the selector detects an object at the camera it will show
on the Receiver.
3. To automatically record a photo of the detected object(person)
refer to
Snap Setting
on page 20 and turn
Auto Snap
to
On
.
4. Additional photos will be saved every 15 to 20 seconds as
long as the object is present.
Shaker jack
