background image

The LEX Unit 

The LEX unit connects to the computer using a standard USB 3.2 Gen 1 cable. Power is provided by the USB Host/Hub 
or optional DC input.

 

ITEM   TYPE

 DESCRIPTION

1

DC Power Port

Optional DC power input, accepts 5V 3A. (Sold separately) 
Icron PN 21-00111 5V 3A Power Supply (LVL VI) 1.7mm ID.

2

Power LED 

*

Refer to note below

LED Is SOLID GREEN When sufficient power is provided by host. LED is SOLID 

AMBER when less than optimal power is not guaranteed by host.

3

Link LED

LED is SOLID GREEN ON when LEX is linked to an opposite REX. LED is OFF or 

BLINKING when there is no connection between the LEX and REX units.  

4

USB Host Port

USB 3 Type-C receptacle used to connect LEX to USB 3 Host computer. 

5

Link Port (ARJ45)

Accepts custom ARJ45 Cable included with product.

6

Mode

Reserved for manufacturer use.

7

Config

Reserved for manufacturer use.

 

 

Guaranteed sufficient power via USB Bus power requires a USB-C connection to a USB-C power upstream capable of 5V 

3A configuration. When using a USB-A to USB-C or similar legacy connection, LED will be AMBER. It is recommended in 

situations where the LED is AMBER that sufficient testing be performed to guarantee system stability.

4

Front View

Rear View

Link

Host

5V DC

1

2

3

4

5

6

7

Link

Config

Mode

note

Summary of Contents for Starling 3251C-10


















Reviews: