background image

Limited Hardware Warranty

Icron Technologies Corporation warrants that any hardware products accompanying this documentation 
shall be free from significant defects in material and workmanship for a period of one year from the date of 
purchase. Icron Technologies Corporation’s hardware warranty extends to Licensee, its customers and end 
users.

The Warranty does not include repair of failures caused by: misuse, neglect, accident, modification, operation 
outside a normal operating environment, failure caused by service of the device by non-authorized servicers, 
or failure caused by a product for which Icron Technologies Corporation is not responsible.

Hardware Remedies

Icron Technologies Corporation’s entire liability and the Licensee’s exclusive remedy for any breach of 
warranty, shall be, at Icron Technologies Corporation’s option, either (a) return of the price paid or (b) repair 
or replacement of hardware, which will be warranted for the remainder of the original warranty period or 
30 days, whichever is longer. These remedies are void if failure of the hardware has resulted from accident, 
abuse, or misapplication.

Limitation of Liability

The hardware warranty set forth in this agreement replaces all other warranties.  Icron Technologies 
Corporation expressly disclaims all other merchantability and fitness for a particular purpose and non-
infringement of third-party rights with respect to the hardware.  

Icron Technologies Corporation dealer, agent, or employee is authorized to make any modification, 
extension, or addition to this warranty. Under no circumstances will Icron Technologies Corporation, its 
suppliers or licensors be liable for any costs of procurement or substitute products or services, lost profits, 
loss of information or data, or any other special, indirect, consequential, or incidental damages arising in 
any way out of the sale of, use of, or inability to use Icron Technologies Corporation product or service, even 
if Icron Technologies Corporation, its suppliers or licensors have been advised of the possibility of such 
damages. In no case shall Icron Technologies Corporation, its suppliers and licensors’ liability exceed the 
actual money paid for the products at issue. 

Because some jurisdictions do not allow the limitation of implied warranties of liability for incidental, 
consequential, special, or indirect damages, the above limitation may not always apply. 

The above limitations will not apply in case of personal injury where and to the extent that applicable law 
requires such liability.

12

Summary of Contents for USB Ranger 2224

















Reviews: