Introduction
The instructions in this guide assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB devices.
NOTE: Notes provide additional information that could be useful.
CAUTION: Cautions provide important information about an operational requirement.
Ranger 2224 Product Contents
Your Ranger 2224 is packaged with:
•
LEX unit (Local Extender)
•
REX unit (Remote Extender)
•
REX AC power adapter (1)
•
USB 2.0 Cable (6 ft)
Quick Start Guide and Warranty Information
•
An additional AC power adapter may be purchased for the LEX unit in the event that your USB port can not supply
the required 500mA current. Please contact an Icron Sales representative for further details (See Page 13).
Requirements
To complete the installation, you will also require the following items that are not included with the product:
•
USB 1.1 or 2.0 compatible computer (host computer) with a USB compliant operating system
•
USB 1.1 or 2.0 compatible device
•
2-strand fiber optic cable with Duplex LC connectors (if using surface cabling)
OR, 2-strand fiber optic cabling with two information outlets and two 2-strand fiber optic patch cords
with Duplex LC connectors (if using premise cabling)
The maximum length of the multimode fiber optic cable (MMF) supported by the Ranger 2224 system, including patch
cords, is 500m on 50/125
μ
m MMF or 275m on 62.5/125
μ
m MMF.
About the Ranger 2224
The Ranger 2224 incorporates Icron’s patented ExtremeUSB® technology, enabling users to extend beyond
the standard 5m cable limit for USB peripheral devices. With the Ranger 2224, USB devices can be located up
to 500 meters from the computer.
The Ranger 2224 is composed of two individual units: the LEX unit and the REX unit.
note
note
note
3
