Manual Number: 41209-003-2
Page 2-6
586MBHP Series Manual
Chipset Setup
Memory Hole
Use this option to specify an area in the memory that cannot be addressed on the ISA bus. The
settings are
Disabled, 512-640K
or
15M-16M.
The default setting is
Disabled.
DRAM Speed
Specify the RAS access speed of the SIMMs installed in the motherboard as system memory. The
settings are
60ns
or
70ns
. The default setting is
70ns
.
IRQ12/M Mouse Functions
Set the option to
Enables
to specify that IRQ12 will be used for the mouse. The settings are
Disabled
or
Enabled
. The Optimal and Fail-Safe default settings are
Enabled.
8-Bit I/O Recovery Time (SYSCLK)
This option specifies the length of the delay (in SYSCLKs) inserted between consecutive 8-bit
I/O operations. The settings are
8, 1, 2, 3, 4, 5, 6
or
7.
The Optimal and Fail-Safe default settings
are
1
.
16-Bit I/O Recovery Time (SYSCLK)
This option specifies the length of the delay (in SYSCLKs) inserted between consecutive 16-
bit I/O operations. The settings are
4, 1, 2
or
3.
The Optimal and Fail-Safe default settings are
1
.
Power Management Setup
Power Management Setup options are displayed by choosing the Power Management icon from
the WINBIOS Setup main menu. All power Management Setup options are described in this
section.
Power Management/APM
Set this option to
Enabled
to enable the power management and APM (Advanced Power
Management) features. AMIBIOS uses the RTC Alarm function to wake the computer at a pre-
specified time. The settings are
Enabled
or
Disabled
or
Inst-On.
The default setting is
Disabled
.
Instant-On Timeout (minute)
This option allow the stand by feature. Set the time from
Disabled
up to
15
minutes. The default
setting is
Disabled
.
Summary of Contents for 586MBHP Series
